XILEMA® Fertigation

 
XILEMA® is an automatic equipment for injecting fertilizers into the watering system that provides greater control over your operation.

 

 FertirrigacionXILEMA2l
  • Xilema® is aleadercontrolled fertigationin high-performance farming both in greenhouses and outdoors
  • Xilema® controls fertigation in different areas of the world: Europe, Latin America, North Africa and in Asia. At the present time, it continues toexpand its services on the five continents.
 

 

XILEMA® is developing daily
  • Extended benefits with the installation of a new software that makes handling the equipment easier and also enhances its features.
  • Offering solutions for all requirements in terms of the different crop types and their development phases, achieving:
  • Saving in manpower.
  • Provision of nutrients in a balanced and uniform manner.
  • Improvement in the quantity and quality of the harvests.
  • Designing a tailored system, because it adapts to any flow, farm size, existing watering head and crop type.
  • Adjusts to the number of outlets or sectors.
  • Permanently developing and perfecting its equipment through the Research and Development Department (R&D).

 

XILEMA STRUCTURES®:

  •  np20000
    For properties
    of small
    to medium size.
     
    NP20copia
  •  np30 For properties
    of medium to large size.
    Compact equipment,
    ideal for long-distance transport.
    NP30copia
  •  np35
    For properties
    of medium to large size,
    with a large numer
    of injectors.
    NP35

 

 
EQUIPMENT COMMUNICATION MODES:

Each Xilema® unit can communicate with a laptop computer using the Windows operating system. The different communication modes are:

  • RS 232 (point to point service). It uses a serial port of the computer and is connected to an NX 300 programmer. It allows a wired connection of up to 20 meters.

  • RS 485 (serial multipoint, daisy chain). It establishes a direct communication between the computer and one or several NX 300 programmers, creating a network of up to 16 units. They allow the connection of units located at a distance of more than 1 km.

  • Radio, Wifi o modem. With direct line of sight it is possible to reach a distance of almost 1 km.

  • Ethernet system, offering high-speed communication. Recommended up to 100 metres.  

 

 

CONTROLLER MODELS:
 
 
NX 32 y NX 32 pH
  • Configurable equipment.
  • Up to 3 watering heads and up to 9 fertilizers per head.
  • Begin by hour or external signal.
  • Filter cleaning.
  • PC communication.
  • PH control in NX32 pH model.
NX 300
  • Ideal for crops grown by hydroponics and in the ground.
  • It controls pH and EC (electrical conductivity).7 fertilizers plus acid/base.
  • Begins watering by schedule or by tray demand.
  • PC communication.
 
Xilema AQUA
  • For crops grown by hydroponics
    and in the ground.
  • It controls pH and EC.
  • 5 fertilizers plus acid.
  • Begins watering by schedule or by external signal.
  • Automatic cleaning of up to 5 filters.
  • PC communication.

 
 
Xilema STAR
  • Ideal for hydroponic crops
  • Up to 3 watering heads, 9 fertilizers per head
  • Begins watering by schedule, external signal or radio.
  • Possibility of watering and fertilizing by volume.
  • Cleaning of up to 20 filters
  • Smart tray demand. .
  • Pre-control of EC by mixing water from different sources
  • PC communication
 

Download Catalog